This was the installation of a 9m parking facilities sliding gate with 20m of galvanised palisade fencing, for Mexmast in Burgess Hill. Gallery Just a few images for this project - sadly our commercial photos are never very exciting! But an effective and extremely secure job was...
This project was for the automation of a set of oak gates. These pretty oak gates were installed by us and then automated, using Roger technology underground operators with a roller arm system.Stunning looking gates that will last many years, give great security and will work...
This project was an upgrade of old faulty sliding gate controls at a garage in Park Lane, London. We ripped out of old electronics and replaced with a new and much more efficient style.Many sets of electric gates have problems with their electrics over time...
This case study was for the installation of security turnstiles in Canary Wharf. 1800 high security pedestrian access speedlanes were installed into a large office. For building security, they are used with card reader access. Gallery Just a couple of images for this project - there is...
This project was for the supply and installation of bespoke arched gates, with a pedestrian side gate. They have been automated with Faac worm driven rams. There is a safety induction loop under the tarmac for ease of use, safety photoelectric beams and a keypad...
This was an enjoyable project for our team. Automation and installation of electric solid oak gates into a residential property is great for us as the finished look really enhances a property and we can take some great photos! You can see from this gallery...
This small project was the installation of a pair of security doors for a village hall. Our local one in East Sussex actually!Ridgewood Village Hall is a busy and very popular hall, used by many for clubs, parties as well as having very good facilities,...
This project was slightly further than we normally travel, up to Immingham in Lincolnshire. But that was no problem at all for our team. The commission involved the removal of a faulty telescopic sliding gate. All cables where made safe and a set of manual...
This was a set of wrought iron electric gates and matching railings. Installed with angled bottom rails to allow the gates to open inwards up the clients driveway. The gates and railings where supplied to us by Two J's Metalworks, who are based in Hadlow...
This project was a motor upgrade. Our engineers installed a FAAC 741 sliding gate motor at Park Farm Estates. Including anticrush settings for the gate regulation compliances. Security Access Solutions don't just install new electric or automated gates. We also repair and upgrade the systems...